Audi A4 B5 airbag control unit repair

What is an Audi A4 B5 airbag control unit?

The Audi A4 B5 airbag control unit is the central safety unit that activates all occupant restraint systems, such as airbags and seatbelt pretensioners, in the event of an accident. It continuously monitors sensors, stores important crash data, and ensures the proper functioning of all airbag modules in the vehicle, which is essential for safety.

This electronic control unit, often installed in the center console, receives signals from impact sensors in the vehicle.

Based on these signals, the control unit decides in milliseconds whether to trigger the passive safety systems for occupant safety.

It is also responsible for diagnosing faults in the airbag system and stores relevant information for the workshop.

A defective unit requires a professional **Audi A4 B5 airbag control unit repair**.

Why is the Audi A4 B5 airbag control unit defective?

Because the Audi A4 B5 airbag control unit can be subject to complex internal electronic errors or external influences such as overvoltage, the airbag warning light often remains permanently illuminated. This requires a professional **Audi A4 B5 airbag control unit repair**, as such defects impair the functionality of the entire safety system.

Common causes of **failure** are internal component failure, corrosion due to moisture or improper interventions on the system.

After an accident, the control unit stores crash data that causes permanent deactivation, even if there is no visible damage.

This stored data blocks the system from re-triggering, which is why a reset or replacement is necessary.

Even low on-board voltage can cause sporadic **errors** in the control unit, which require precise **diagnosis**.

Common error codes for Audi A4 B5 airbag control unit repair

When repairing the Audi A4 B5 airbag control unit, specific error codes are crucial for identifying the cause of the airbag warning light. Codes like 65535 or B2000 49 directly indicate an internal defect in the control unit, making repair or replacement necessary.

• 65535 → Control unit defective → Non-resettable malfunction in the internal system of the airbag control unit.
• B2000 49 → Internal electronics error → A serious internal error that affects the function of the control unit and permanently activates the airbag warning light.
• 532 → Supply voltage / signal too low (sporadic) → Problems with the on-board voltage or insufficient power supply that can affect the airbag control unit.
• 0485833 → Control unit defective, internal error → A documented internal defect in the control unit, which also permanently activates the airbag warning light and cannot be deleted.
• FFFF → Component defective (control unit) → A general error code that indicates a defect in the airbag module itself.

What part numbers are available for the Audi A4 B5 airbag control unit repair?

For the **Audi A4 B5 airbag control unit repair**, several specific OEM part numbers are relevant, ensuring exact compatibility with your vehicle model. These numbers, such as 8D0 959 655 L or 8A0 959 655 C, identify the correct control unit for a safe restoration of airbag function.

The most common original Audi/Continental numbers relevant for workshop diagnostics include:

• 8D0 959 655 L (original airbag control unit from Audi/Continental)
• 8D0 959 655 F (original airbag control unit, often labeled as non-repairable)
• 8D0 959 655 TB (original replacement unit, directly compatible with 8D0 959 655 F)
• 8D0 959 655 J (Another original part number of the airbag control unit from Audi/Continental)
• 8A0 959 655 C (original airbag control unit from Audi/Siemens/Continental, especially for diesel models such as the AFN engine)

These part numbers are crucial to finding the correct replacement part and ensuring a successful **repair** if the old unit is **broken**.

Only OEM part numbers or confirmed direct replacement numbers should be used for repair and replacement to ensure full functionality.